Hot rolled steel flats in straight
lengths suitable for a variety of structural, engineering and pressworking
applications. After suitable preparation the product will accept a variety
of finishes e.g. galvanising and painting.
Hot rolled flats are available in most combinations of width and thickness
within the range specified below:
Hot Mill 1
from 16mm up to 80mm wide, by
3mm up to 15mm thick.
Hot Mill 2
from 10mm up to 30mm wide, by
2mm up to 8mm thick.
profiles can be rolled within similar geometric limits.
BS970 Pt. 1 dimensional tolerances are standard for mill edge hot mill
10 to 35mm +/- 0.5mm, 35 to
75mm +/- 0.8mm,
over 75mm +/- 1.0mm
up to 10mm +/- 0.4mm, over 10mm
Standard +300mm, Exacts +50mm,
tolerances and SPC analysis can be supplied by agreement.
Bars are available in lengths
up to 8.0 metres. Bar ends are cleanly sheared. Standard bundles are 2000
kg secured with tensioned bands. Smaller bundles available by agreement.
Hot Mill 2 flats are also available in coil.
Re-shearing, cold straightening,
pickling and oiling, special bundling and wrapping.
Iron & Steel Co Ltd
Hot Rolled Flats &
the future in steel
products to the world