Hot rolled steel feather edge
convex profiles in straight lengths. We also produce square edge convex
and half rounds.
Hot rolled feather edge convex profiles are available in many combinations
of width and thickness within the range specified below:
Hot Mill 1
from 20mm up to 80mm wide, by
5mm up to 13mm thick.
Hot Mill 2
from 10mm up to 25mm wide, by
3mm up to 6mm thick.
The following dimensional tolerances
are standard for feather edge convex profiles (DIN 1018).
up to 75mm +/- 1.0mm, over 75m
all +/- 0.5mm
Standard + 300mm, Exacts + 50mm,
Re-sheared + 6mm
tolerances and SPC analysis can be supplied by agreement.
Bars are available in lengths
up to 8.0 metres. Bar ends are cleanly sheared. Standard bundles are 2000
kg secured with tensioned bands. Smaller bundles available by agreement.
Re-shearing, cold straightening,
pickling and oiling, special bundling and wrapping.
Iron & Steel Co Ltd
Hot Rolled Flats &
the future in steel
products to the world